1. Demo recording guide

[Click here](https://l4dsr.github.io/l4dsr-wiki/docs/tutorials/welcome/demos)

An explanation of speedglitch

## What is speedglitch?

To put it simply, speedglitch is literally just the game running faster, similar to if you just turned up host_timescale. There are three tiers of speedglitch which I'll explain the meaning behind in a moment: 32, 34.5, and 36.3. This glitch only works on L4D1 1.0.0.5.

"32" is equivalent to host_timescale 1.06, "34.5" is equivalent to host_timescale 1.14, and "36.3" is equivalent to host_timescale 1.20. These can sometimes also be referred to as 6.1, 5.7, and 5.3 (the amount of seconds it takes between the scoreboard appearing and the next level load to start at the end of the level - normally, without speedglitch, this takes 6.5 seconds).

32/34.5/36.3 refer to the number of packets you are sending/receiving to and from the server as shown in the right side of net_graph (requires **net_graph 1**, and increased **cl_cmdrate** or increased **cl_updaterate** (or both) in order to see it here:

![](https://i.imgur.com/rhoRMbK.png)

## How do I trigger/"enable" speedglitch?

When you open your game, simply create a lobby. You don't need to load into a server, just entering a lobby is enough. After that, speedglitch can occur in any type of server (singleplayer, lobby or **map** command) until you restart your game.

## How does it work/how do I use it in a run?

Certain levels will almost always (if not always) have the slowest speedglitch (32) upon loading in: Turnpike, Hospital, and Terminal. If you then die and restart that level, you will spawn in with the fastest speedglitch (36). This applies for any case where you have 32 speedglitch - if you die and restart the level, you should get the 36 speedglitch when you respawn. Otherwise, if the level started at normal speed, then you will most likely get 34.5 speedglitch after you die. The speedglitch will last until you transition to the next level.

**Note:** According to a message in the discord from @JurasPatryk , there is about a 50% chance of getting speedglitch on most levels in the game, but if you start on No Mercy, then there is a 99% chance you will get it on the finale. Unsure if this means you'll load in with 32 or just have good odds at getting 34 if you die and respawn at the start, but yeah.

Generally, you will only want to purposefully kill yourself to activate it on long levels (Hospital, and every finale), as those are the only places where the game running faster is worth the time taken to die and restart the level when you load in.

## How do I avoid speedglitch?

If you don't want to run speedglitch, don't ever enter a lobby. If you want to run no speedglitch co-op, you will need to use a **map** command server and port forward (or use alternative networking methods like Radmin VPN... or Hamachi 🤮), then connect via your friend's IP address.

Recording and Uploading a Demo for the "Individual Maps" Category

This guide is a work-in-progress and may be iterated upon!

A "Demo" is a recording of your inputs used during gameplay which is recorded to a file that anybody else can then replay in their own running game as if they were playing it themselves, which makes it great for timing this category accurately! All it requires is usage of the developer's console and remembering to set a couple of key bindings. Examples of what you need to bind to reset each map successfully are at the bottom of this guide.

To enable the console, click Options > Keyboard/Mouse > toggle "allow developer console" to "Enabled". Now you can bring it up with the ~ key, to the left of 1.

The command to record a demo is "record" and anything after is what the filename will be. Entering "record YayFilename" would create a file called "YayFilename.dem" in your "Steam\SteamApps\common\left 4 dead\left4dead" folder. Once you are finished with a run, you can stop the demo recording manually by entering "stop" in the console.

For resetting the first level of any campaign, you can bind the "restartgame" vote to a key. To reset No Mercy 1, an example would be: bind v "callvote restartgame; stop; wait 1200; record ExampleBind"

For resetting any level besides the first one in the campaign, you can use the "changelevel" command. To reset No Mercy 2, an example would be: bind v "changelevel l4d_hospital02_subway; stop; record ExampleBind"

Change the key after "bind" to anything you are comfortable with using. A list of names for all special keys as well as more information on binding can be found here, https://developer.valvesoftware.com/wiki/Bind

Here are the commands you would want to bind for each level. Insert these after binding to your reset key of choice and modify the name after "record" to anything you'd like:

NO MERCY
	1 - "callvote restartgame; stop; wait 1200; record NM1_Apartment"
	2 - "changelevel l4d_hospital02_subway; stop; record NM2_Subway"
	3 - "changelevel l4d_hospital03_sewers; stop; record NM3_Sewers"
	4 - "changelevel l4d_hospital04_interior; stop; record NM4_Hospital"
	5 - "changelevel l4d_hospital05_rooftop; stop; record NM5_Rooftop"

DEATH TOLL
	1 - "callvote restartgame; stop; wait 1200; record DT1_Caves"
	2 - "changelevel l4d_smalltown02_drainage; stop; record DT2_Drains"
	3 - "changelevel l4d_smalltown03_ranchhouse; stop; record DT3_Church"
	4 - "changelevel l4d_smalltown04_mainstreet; stop; record DT4_Town"
	5 - "changelevel l4d_smalltown05_houseboat; stop; record DT4_Boathouse"

DEAD AIR
	1 - "callvote restartgame; stop; wait 1200; record DA1_Greenhouse"
	2 - "changelevel l4d_airport02_offices; stop; record DA2_Crane"
	3 - "changelevel l4d_airport03_garage; stop; record DA3_ConstructionSite"
	4 - "changelevel l4d_airport04_terminal; stop; record DA4_Terminal"
	5 - "changelevel l4d_airport05_runway; stop; record DA5_Runway"

BLOOD HARVEST
	1 - "callvote restartgame; stop; wait 1200; record BH1_Hilltop"
	2 - "changelevel l4d_farm02_traintunnel; stop; record BH2_Tunnel"
	3 - "changelevel l4d_farm03_bridge; stop; record BH3_Bridge"
	4 - "changelevel l4d_farm04_barn; stop; record BH4_TrainStation"
	5 - "changelevel l4d_farm05_cornfield; stop; record BH5_Farmhouse"

CRASH COURSE
	1 - "callvote restartgame; stop; wait 1200; record CC1_Alleys"
	2 - "changelevel l4d_garage02_lots; stop; record CC2_TruckDepot"

THE SACRIFICE
	1 - "callvote restartgame; stop; wait 1200; record TS1_Docks"
	2 - "changelevel l4d_river02_barge; stop; record TS2_Barge"
	3 - "changelevel l4d_river03_port; stop; record TS3_Port"

Tutorial for Calculating a Loadless Time Manually

**Make sure to read the overview below the video for some extra information that didn't get included!**

Watch this quick video I recorded to see how to manually calculate what your loadless time is in a run. It is very easy once you get accustomed to it!
https://www.youtube.com/watch?v=2fdJENpsgfI

For a brief overview, timing starts on the first frame you see any HUD element appear, and runs through the frame before your mouse cursor appears. It is highly recommended that you capture your mouse cursor in your recording as that is a more accurate way to time, but if you do not record your cursor then you accept a slight time loss and can instead use the little red "4" loading icon that appears in the upper-right just after. Timing then resumes when you see any HUD element load again next map, usually your weapon, crosshair, teammate health bars, or the item sidebar on the right. 

For campaign transitions in a full-game run, timing runs through the frame before you see your mouse cursor appear and, if failing to record your cursor, instead being when the next campaign's poster appears, and resumes on the first frame you can see any HUD element appear when there is no cutscene. If a cutscene does play, time resumes on the first frame after the transitional loading poster disappears.

TheMaster

aciidz

Left 4 Dead

No Mercy

Dead Air

Xbox Series X

PeluucA

Vercherin

Lemzeltionic

1 - The Apartments

2 - The Subway

3 - The Sewer

4 - The Hospital

5 - Rooftop Finale

1 - The Alleys

2 - Truck Depot Finale

1 - The Turnpike

2 - The Drains

3 - The Church

4 - The Town

5 - Boathouse Finale

1 - The Greenhouse

2 - The Crane

3 - The Construction Site

4 - The Terminal

5 - Runway Finale

1 - The Woods

2 - The Tunnel

3 - The Bridge

4 - The Train Station

5 - Farmhouse Finale

1 - The Docks

2 - The Barge

3 - Port Finale

Solo

Co-op

Newest

1.0.0.5 Speedglitch

No Speedglitch

Number of Players

Version

Speedglitch Original Solo

Speedglitch Original Co-op

Hi everyone. As you have most likely heard by now, Twitch is imposing a 100 hour limit on **highlight** storage starting on April 19th. If you are over that limit on the 19th, Twitch will start deleting your highlights with the least views until you are under the limit. This means that a lot of old 

İsim	Yazar
1. Demo recording guide	aciidz 1 year ago
An explanation of speedglitch	aciidz 1 year ago
Recording and Uploading a Demo for the "Individual Maps" Category	TheMaster 7 years ago
Tutorial for Calculating a Loadless Time Manually	TheMaster 5 years ago