BO3 Master Guide (Campaign)

BO3 Softlock Guide (Campaign & Nightmares)

Deleting cutscenes and loading screens (Campaign)

https://www.youtube.com/watch?v=yJjbLcI7kxM

Where to locate:
Steam >> Library >> BO3 >> Properties >> Local Files >> Browse >> video folder

Cutscenes to delete:
- All loadingmovie videos
- cp_ramses2 videos
- cp_biodomes_load... video
- cp_lotus1_fs... video
- cp_lotus1_pip... video
- All cp_infection_fs... videos (optional)
- bo3_global_logo... video (optional)

How to setup V-Meter and TSCID

https://www.youtube.com/watch?v=N753rHLLitQ

For new runners, a V-Meter and TSCID are both memory values that are displayed over your livesplit to make sure runs aren't cheated. The V-Meter and TSCID are both required for top 3 runs on every category (with the exception of freerun) that are ran on PC. This means console players are free and don't have to do it (since it's pretty much impossible to do so on console). These two are both very easy to download and set-up. First you'll need to download the memory graph add-on and paste the DLL into your livesplit components folder. Second, you'll need to download the V-Meter/TSCID layout and open it using livesplit. Finally, you'll need to either open another livesplit with the timer on it or you'll need to add a timer and splits on the V-Meter/TSCID layout (as long as you aren't messing with the memory graph stuff).

# Realistic/Veteran Difficulty

On the realistic or veteran difficulty categories, you will need to use a V-Meter, TSCID, AND Dif-Meter. The Dif-Meter is ONLY required on realistic/veteran mode (top 5 runs on PC) and does not need to be used on any other category. You can use this by downloading the Dif-Meter Layout (and having the memory graph DLL of course). The Dif-Meter Layout will have the TSCID and the V-Meter as well so you won't need to open another livesplit.

# Downloads

Memory Graph add-on: https://www.dropbox.com/s/f09oxmni3kggncp/LiveSplit.MemoryGraph.dll?dl=0

V-Meter & TSCID Layout: https://www.speedrun.com/resourceasset/tjeok

Dif-Meter Layout: https://www.speedrun.com/resourceasset/052wp

# Memory Graph Data

Process: BlackOps3

Base (V-Meter): 9F43ABC

Base (TSCID): 347F100

Base (Dif-Meter): 17AA1B04

JayZany's Alpha Speedrun Guide.

A speedrun guide for the alpha freerun course. By: JayZany

https://youtu.be/al08tKosSVI

Level Up Fast for NG+ (Campaign)

https://www.youtube.com/watch?v=AES__-BEKyg
Notes: Method #2 is by far the best and easiest method for getting XP while Method #1 is by far the best method for grinding for camos/attachments on guns. You can get any item/attachment you want using the UI stack glitch so grinding for attachments can be useless unless you don't feel like UI stacking.

**Fastest Methods**:
1: *Method #2*
2: *Method #1*
3: *Method #3C*

#***Method #1***
- Make a class with the Haymaker and War Machine
- Load up Hypocenter in Realistic
- Once Hypocenter has loaded up, set difficulty back to Recruit
- Get to the Diaz fight
- Disable all three core towers but don't blow the last one up with a grenade
- Stand on the ammo box next to the pillar
- Move in a spot so the bots chase you from below and then stay there
- Set difficulty back to Realistic and start killing as much bots as you can
- When you are *done* and at the desired level, blow up the last core tower and hit exit
#***Method #2***
- Load up Sand Castle (could set it in Realistic)
- After entering VTOL mode take down every air defense except one of them
- Once there is one left you can set your difficulty to realistic mode and start spawn trapping all of the enemies. They will spawn indefinitely until the last air defense is taken down (so leave that air defense alive).
- Exit after levelling up
#***Method #3***
- Load up Rise & Fall
- Get to the part where you plant the spikes
- Plant all the spikes in the weak spots except the very last one
- Start killing every enemy and going back to the ammo box to get ammo
- After you are *done* and hit the desired level, plant the last spike and destroy it, then exit
*Method #3B*:
- Instead of getting the ammo box you can also spawn trap the enemies on the right side and steal ammo from some of the dead ones
- After you are *done* and hit the desired level, plant the last spike and destroy it, then exit
*Method #3C*:
- Load up Rise & Fall in Realistic
- Get to the first battle and set difficulty back to Recruit
- Get to the part where you plant the spikes
- Plant all the spikes in the weak spots except the very last one
- Wait for the talons to come and hack them with Remote Hijack
- Set difficulty back to Realistic while hacking a talon
- Start killing enemies in the talons
- Once the talon dies, set difficulty back to Recruit and wait to hack another one
- Keep repeating the last four steps until you hit the desired level
- After you are *done*, plant the last spike and destroy it, then exit
#***Method #4***
- Load up the Safehouse in Realistic with a split screen
- With Player 2, head to the chair in the top-right corner and sit in it
- With Player 1, head to the same chair Player 2 is sitting in and attempt to sit in it (if it doesn't work you need to reboot the safehouse)
- Start the Combat Immersion with both players at the same time
- Check if Player 1 has god mode (he will have no HUD)
- IF Player 1 doesn't have god mode, both players need to exit combat immersion and repeat the last two steps
- Once Player 1 has god mode, Player 2 can exit the Combat Immersion arena
- Player 1 can complete the Combat Immersion
- Once Combat Immersion is complete and you still want to level up, just start the Combat Immersion at the same time with both players again and repeat the last steps until you hit the desired level
- Upon hitting the desired level, exit the game

Ndt's Exit Warp Strategy (Campaign)

#**Exit Warping**
https://www.youtube.com/watch?v=KSDhU2POgQA
Exit Warp Timestamps:
Exit Warp #1 (Black Ops): 0:21
Exit Warp #2 (In Darkness): 1:02
Exit Warp #3 (In Darkness): 1:58
Exit Warp #4 (Hypocenter): 2:51
Exit Warp #5 (Hypocenter): 3:46
Exit Warp #6 (Rise & Fall): 4:48
Exit Warp #7 (Sand Castle): 5:39
Exit Warp #8 (Lotus Towers): 6:51
Exit Warp #9 (Lotus Towers): 7:39
Exit Warp #10 (Lotus Towers): 8:14
Exit Warp #11 (Lotus Towers): 8:44
Exit Warp #12 (Lotus Towers): 11:04

What is an Exit Warp?
https://www.youtube.com/watch?v=fT-cG_ks3ho
Exit Warping is a strategy in the BO3 campaign where you can go to the main menu when a save point has been created by the game and resume story. This causes you and/or the AIs (Hendricks, Kane, etc.) to warp forward in time where the save point has been created. This in return will save time and dodge softlocks.

How to Exit Warp?
To Exit Warp you need to pause the game then quit to the main menu on certain save points of the game. After you are back in the main menu press resume story. Not all save points will save time so there are only about 12 known exit warps.

How do Exit Warps work?
A save point is a checkpoint that saves your game when you reach it. When a save point is activated, BO3 will send data to your savegame file. The data will only contain four things; the current mission, the scoreboard, the class(es) being used, and the checkpoint name. The game will not attempt to save your position, entity positions (Hendricks, enemies, etc.), or entities that are alive. Because of this, the game will need to set you and Hendricks's position, entities that are alive, etc. This is done by checking the checkpoint name. Each checkpoint has a piece of a script that runs and will place you, Hendricks, and other entities to a certain spot every time you resume the story. For example, let's say you quit game on the "gen_lab" checkpoint. When you resume story, the game will read that you are on "gen_lab" and will always place you and Hendricks on the outside of the gen lab everytime you resume story. This mechanic can be manipulated in speedrunning favor. That very same gen_lab checkpoint also is an exit warp. The checkpoint right before that is actually just rushing straight to the gen_lab checkpoint. Since Hendricks is much slower than you, you will always end up making it to that checkpoint way before him. So when you exit and resume story, it will place Hendricks right outside the gen lab way before the time he would actually reach it without doing that. So in a way, it's like warping forward in time. Since that part is very AI dependent, it mostly matters about Hendricks reaching the end and not as much as you. This is how most of the exit warps work.

Exit Warp Count:
TOTAL: 12
Black Ops: 1
New World: 0
In Darkness: 2
Provocation: 0
Hypocenter: 2
Vengeance: 0
Rise & Fall: 1
Demon Within: 0
Sand Castle: 1
Lotus Towers: 5
Life: 0

**Setting up Exit Warps on NG+**:
https://www.youtube.com/watch?v=4qcdu8wZOnI
Solo PC Users: Download the save file in the resources and begin the run by hitting resume story (then restart mission, timer starts when the text scrolls)
Everyone Else: Follow the steps in the video. You'll need to UI stack the deploy screen in the safehouse than set the mission to Black Ops. If you're savegame is in the safehouse, you'll get no deploy screen. So if it is, just hit resume story and start the mission, then you can follow the steps.

**Setting up Exit Warps on Any Map (For Practice)**:
https://www.youtube.com/watch?v=YXhG-BuJgyo
If you want to practice exit warps on a map like Lotus Towers or something like that, follow this guide. You'll need to UI stack the deploy screen in the safehouse than set the mission to whatever you want. If you're savegame is in the safehouse, you'll get no deploy screen. So if it is, just hit resume story and start the mission, then you can follow the steps. If you're on steam, you could get the CP Platinum Menu in the resources which has an exit warp practicing mode on it.

What is the savegame?
The savegame is the current checkpoint that the "resume story" button will take you to. It's the last checkpoint where you left off before quitting. This will matter A LOT if you are planning on doing an NG+ run with exit warps (NG won't matter because everytime you reset your campaign, the savegame is set back to Black Ops). So if the savegame isn't set to Black Ops, exit warps won't work because you aren't actually using the savegame. You can check where your savegame is by hitting resume story. If it is on Black Ops, you can begin your run by hitting restart mission. If it is anywhere else, you need to finish the entire campaign (when you complete Life, it will go back to Black Ops).

#**Death Warping**
https://www.youtube.com/watch?v=tc45jK5oHaU
(forgot to update the intro but there are now 12 death warps and it's the new META)
Death Warp Timestamps:
Death Warp #1 (Black Ops): 0:24
Death Warp #2 (Black Ops): 1:26
Death Warp #3 (In Darkness): 2:03
Death Warp #4 (In Darkness): 3:03
Death Warp #5 (Hypocenter): 3:57
Death Warp #6 (Hypocenter): 5:11
Death Warp #7 (Rise & Fall): 5:48
Death Warp #8 (Lotus Towers): 6:33
Death Warp #9 (Lotus Towers): 7:14
Death Warp #10 (Lotus Towers): 8:18
Death Warp #11 (Lotus Towers): 9:08
Death Warp #12 (Lotus Towers): 11:13

What is a Death Warp?
https://www.youtube.com/watch?v=yiBjJVd7_aI
Death Warping is the alternative to Exit Warping. It's a quicker (but riskier) way of warping in the BO3 campaign where you die right after collecting certain checkpoints and it warps you forward in time (a few exit warps are faster then the death warps). This causes you and/or the AIs (Hendricks, Kane, etc.) to warp forward in time as well as despawning rooms of enemies. The main Death Warping rule is that you need to prevent any close checkpoints from being created (so that you don't die and you reach those checkpoints). Checkpoint creation will get cancelled if you are damaged and/or holding an offhand weapon as you are "collecting" the checkpoint. Death warping acts as an Exit Warp because it is setting up the map again because you died too quickly after getting a checkpoint and you had full health. A positive side that death warping has is that they can be done with or without setting the savegame to your run and you don't have to exit or resume story at all. Since death warping is allowed on ILs (still banned on glitchless) but not exit warping, this is the alternative that you use on ILs. Just a note, not every exit warp can be used as a death warp instead. However, every death warp can be used as an exit warp.

What if you mess up a Death Warp in a full-game run?
https://www.youtube.com/watch?v=7BYonyQ-Uek
If you attempt a Death Warp and it fails just Exit Warp instead. It will still work even if you fully die and respawn to the checkpoint before that because the game stores the latest checkpoint you were ever at the entire mission which includes the Death Warp checkpoint before it failed. So basically the back-up strategy is to Death Warp and if it fails after you respawn just Exit Warp and then it will fix it for you.

How can the warps be optimized the most?
https://i.imgur.com/5bhpxYv.png
Although death warps are faster than exit warps most of the time, they still take longer to setup and it could be a waste of time setting some of them up which makes exit warping faster on some parts. For example, Death Warp #10 (Lotus Towers) takes way too long to setup because you have to hold a grenade the entire time. Although it is still faster than warpless, Death Warp #10 is still worse than Exit Warp #10 without loads. Not only that, but certain death warps do not exist on parts where you can exit warp, such as Exit Warp #5 on Hypocenter (the game softlocks if you do death warp on that part, so Death Warp #6 takes place on the cutscene before Exit Warp #5) and Exit Warp #7 on Sand Castle (death warping does not work at all on this part). After discovering that death warping can be faster than exit warping on most parts of the game, it can now be optimized by splitting the exit warps and death warps into a run. If you aren't good at setting up death warps at all, I'd just stick with exit warps on full-game. However, if you are good at setting up death warps, you can use the order of warps for the best possible time saves without loads on full-game.

Order of Warps:
- Death Warp #1 (Black Ops)
- Death Warp #2 (Black Ops)
- Death Warp #3 (In Darkness)
- Death Warp #4 (In Darkness)
- Death Warp #5 (Hypocenter)
- Exit Warp #5 (Hypocenter)
- Death Warp #7 (Rise & Fall)
- Exit Warp #7 (Sand Castle)
- Death Warp #8 (Lotus Towers)
- Death Warp #9 (Lotus Towers)
- Exit Warp #10 (Lotus Towers)
- Death Warp #11 (Lotus Towers)
- Death Warp #12 (Lotus Towers)

#**Realistic Warping**
https://www.youtube.com/watch?v=bVQ9ac5F1CM
Realistic Warp Timestamps:
Death Warp R1 (New World): 0:09
Exit Warp R1 (New World): 0:55
Death Warp R2 (In Darkness): 1:21
Death Warp R3 (Provocation): 1:52

What are the realistic warps?
The realistic warps are a list of Death Warps and Exit Warps that are used on realistic speedruns. These warps can be used on any difficulty yet they are only used in realistic difficulty. The reason for this is because these warps despawn rooms of enemies that you can skip at anytime. The problem is, these rooms will almost guarantee death if you try to skip it on realistic because your invisibility will run out. So instead, you can use these death warps and exit warps on the last checkpoint of these rooms which will clear out the rooms for you and let you go as fast as you want without dying. Since one shot kills you on realistic difficulty, they are saving time by despawning a large amount of enemies but these warps will waste time if attempted on the normal full game runs.

UI Stack Strategy (Campaign)

#**Ndt's UI Stack Headstart Strategy for NG**
https://www.youtube.com/watch?v=2hYYl1TUZ3E

**First Step**:
1. Create a Haymaker variant with 6 attachments.
2. After this is done you don't have to do this anymore after you reset.

**Manifest Easter Egg Method**:
(Requirements: If your on PC you need to plug in a controller)
1. After resetting campaign stats and before heading into the safehouse, press Start (Xbox) or Options (PS4) (or M if on PC) and head over to the Options tab.
2. Hover over the "Controls" area (it shows your controller or keyboard as the icon).
3. You need to hold all 4 of these buttons at the same time:
- XBOX: **RT**+**X**+**Y**
- PS3/PS4: **R2**+**☐**+**△** (L2+R2+SQUARE+TRIANGLE)
- PC (KB/Mouse): Unknown
4. A hidden menu will popup on your screen if done correctly.
5. Spell out "Manifest" on the hidden menu and press OK. If the Easter egg is done correctly you will receive 100 fabrication kits for free (You can check after loading safehouse).

(Note: Everything below here will need to be redone when resetting campaign stats)
**Safehouse as Level 1**:
1. Upon resetting campaign stats start up campaign and select settings.
2. Press "Select Mission", Select "Black Ops".
3. If "Black Ops" pops up on the bottom left, hit "Start Game".
4. If this is during a run, you want to start your timer as soon as you are in the Safehouse.

**What you need to purchase**:
1. Head over to the Cybercore station and open it.
2. On control, purchase Ravage Core and purchase Remote Hijack.
3. Upgrade Remote Hijack so it appears as "Enh. Remote Hijack"
4. Slide over to the Martial tab.
5. Upgrade Overdrive so it appears as "Enhanced Overdrive"
6. Buy Overwhelming Force and upgrade it so it appears as "Unstoppable Force".
7. Buy Takedown and upgrade it so it appears as "Rapid Strike".
8. Make your way to Active Camo by purchasing Smoke Screen and Weapon Lockout on the left side.
9. Purchase Active Camo and upgrade it so it appears as "Extended Camo"
10. Slide over to the Chaos tab.
11. Purchase Immolation and upgrade it so it appears as "Adaptive Immolation"
12. Make your way to Sonic Anti-Personnel by purchasing Blinding Swarm.
13. Purchase Sonic Anti-Personnel and upgrade it so it appears as "Enhanced Sonic A.P."
14. Exit the Cybercore station and head over to the Loadouts.
15. Choose *Custom 1* and select TAC-RIG.
16. Purchase Traversal Enhancement and Sensory Buffer and upgrade both of them.
17. Select the Upgraded Traversal Enhancement on TAC-RIG slot 1.
18. Select the Upgraded Sensory Buffer on TAC-RIG slot 2.

**Level 1 War Machine/Haymaker**:
(Requirements: If your on PC you need to plug in a controller)
1. While in the safehouse, open the loadouts.
2. While on the Loadouts menu, disconnect your controller.
3. Reconnect your controller, unpause your game and select "OK" on the error (Don't move either joystick or mouse afterwards).
4. Stack another Loadout menu on your screen:
*- XBOX: Hold X until screen flashes.*
*- PS3/PS4: Hold ☐ (Square) until screen flashes.*
*- PC (KB/Mouse): Hold F until screen flashes.*
5. Exit the unstacked Loadout menu:
*- XBOX: Press B until you can see the safehouse.*
*- PS3/PS4: Press ○ (Circle) until you can see the safehouse.*
*- PC (KB/Mouse): Press ESC until you can see the safehouse.*
6. If the loadout is stacked on your screen while you can move and see the safehouse, your good, don't press any other button/key except movement buttons.
7. Head over to the Combat Immersion chair and sit in it.
8. After the Combat Immersion screen is up, select "Begin Combat Immersion.
9. Head over to primary, choose Haymaker than the variant that was created. Then choose the War Machine, C4s, and EMPs.
10. Exit out the class.
11. Press Start (XBOX) or Options (PS4) and select "End Combat Immersion".
12. Close both of the stacked loadout menus.
13. Check "Custom 1" class to make sure everything is saved correctly.
14. Head over to deploy in mission, accept the "Restart Mission" prompt and select your class.
15 (PC ONLY). You can now unplug controller and switch back to keyboard if preferred.

(NOTE: If this is done during Co-Op, the host needs to boot up a solo Safehouse, complete the steps, and then friend/friends join after the mission has been booted up)

#**UI Stack Tutorial**
**Safehouse UI Stack**
https://www.youtube.com/watch?v=cHEu9EkTrIY
(Requirements: If your on PC you need to plug in a controller)
1. While in the safehouse, open the loadouts.
2. While on the Loadouts menu, disconnect your controller.
3. Reconnect your controller, unpause your game and select "OK" on the error (Don't move either joystick or mouse afterwards).
4. Stack another Loadout menu on your screen:
*- XBOX: Hold X until screen flashes.*
*- PS3/PS4: Hold ☐ (Square) until screen flashes.*
*- PC (KB/Mouse): Hold F until screen flashes.*
5. Exit the unstacked Loadout menu:
*- XBOX: Press B until you can see the safehouse.*
*- PS3/PS4: Press ○ (Circle) until you can see the safehouse.*
*- PC (KB/Mouse): Press ESC until you can see the safehouse.*
6. If the loadout is stacked on your screen while you can move and see the safehouse, your good, don't press any other button/key except movement buttons.

**Menu UI Stack**
https://www.youtube.com/watch?v=Z4LUGTi-M2E
This guide will show you how to UI stack in the main menu. This type of UI stack is how to make the death warp class.

#**V2 META Class**
https://www.youtube.com/watch?v=HaPs65gJDrc
This guide will show you how to get the stacked version of the META class for NG+. It has 1 extra C4, 6 attachments, and 0 wildcards. You're going to need to know the safehouse UI stack in order to do this.

#**Death Warp Class**
https://www.youtube.com/watch?v=rIzFF8f_50w
This guide is on how to get the death warp glitched class. This is where you put a thermite in your tactical slot because they are faster at killing you. You can still do death warps without the death warp class but this makes things a bit faster. You're going to need to know the menu UI stack in order to do this.

#**Resetting Savegame Glitch**
https://www.youtube.com/watch?v=4qcdu8wZOnI
This is super easy, you just need to UI stack the deploy message in the safehouse and change the mission to Black Ops. You'll need your savegame to be set to a mission and not in the safehouse. If it is in the safehouse just boot up the mission when you press resume story and follow these steps after.

#**Setting Savegame To Any Map**
https://www.youtube.com/watch?v=YXhG-BuJgyo
This is super easy, you just need to UI stack the deploy message in the safehouse and change the mission to whatever you want. You'll need your savegame to be set to a mission and not in the safehouse. If it is in the safehouse just boot up the mission when you press resume story and follow these steps after.

#**Wildcard Slot Clearing**
https://www.youtube.com/watch?v=DXNr_6_rqdM
This guide will show you how to delete wildcards from your class while keeping its uses. This means that you can have 6 attachments with 0 wildcards.

#**Free Items**
https://www.youtube.com/watch?v=bPrCllUrCcY
Use this guide to figure out how to get any item, attachment, tactical rig (except upgraded), lethal, or tactical on your class using a glitch. It doesn't require fabrication kits or any level. So with this you can be level 1 and get a maxed out class.

Steps:
1. Enter the safehouse
2. Open the armory
3. Disconnect your controller
4. Reconnect your controller and unpause the game
5. Hit "OK" on the reconnect controller prompt
6. Stack the armory again on your screen (hold X on Xbox, F on PC, or ☐ on PSN)
7. Close the stacked armory out of your screen (press B on Xbox, ESC on PC, ○ on PSN)
8. Enter the combat immersion
9. Choose any class and put whatever you want on it (use D-Pad on controller or arrow keys on PC to navigate)

#**Triple C4/6 Attachments Glitched Class**
https://www.youtube.com/watch?v=1gp8NW-plAA
Use this guide to figure out how to use three lethals (C4s are recommended) and 6 attachments in one class. The reason this can't be done without glitches is because you need all three attachment wildcards in order to have 6 attachments without glitches. So the solution to this is to UI Stack a 6 attachment weapon variant to class 1 which won't equip the wildcards and still keep the attachments due to the class interchanging between the combat immersion class and class 1. After that is done, you can add the three C4s and even any other wildcard you'd like since the space is clear.
1. Enter the safehouse
2. Open the weapon builder and create a variant with 6 attachments
3. Make sure the combat immersion class does not have the danger close wildcard and add the three attachment wildcards
2. Open the armory
4. Delete all wildcards in class 1 and add the danger close wildcard (and also add the additional lethal)
5. Go back to the screen where it shows the list of classes so you can UI stack
6. Disconnect your controller
7. Reconnect your controller and unpause the game
8. Hit "OK" on the reconnect controller prompt
9. Stack the armory again on your screen (hold X on Xbox, F on PC, or ☐ on PSN)
10. Close the stacked armory out of your screen (press B on Xbox, ESC on PC, ○ on PSN)
11. Enter the combat immersion
12. Choose class 1 and add the weapon variant with 6 attachments

#**Other UI Stack Glitches**
**Scratched Campaign Weapons**
https://www.youtube.com/watch?v=jNGxA2ISxtY
This guide is on how to get glitched specialist weapons in campaign like scythe, tempest, ripper, etc. You're going to need to know the menu UI stack in order to do this.

**Purifier in Campaign Glitch**
https://www.youtube.com/watch?v=ROvQcR-NAt8
This guide is how to get the purifier weapon in campaign. You're going to need to know the menu UI stack in order to do this.

**MP Tacticals in Campaign Glitch**
https://www.youtube.com/watch?v=5eo1Xb80QD4
This guide will show you how to get the scratched tactical weapons in campaign. You're going to need to know the menu UI stack in order to do this.

**More Than 2 Weapons // XM-53 Glitch**
https://www.youtube.com/watch?v=WB8uZ5VOFyY
This guide will show you how to put the XM-53 in your class or equip up to 4 weapons. You're going to need to know the menu UI stack in order to do this.

**Knife in Campaign Glitch**
https://www.youtube.com/watch?v=4TaCbsv0UPU
This guide will show you how to get two different knives in the campaign.

**Double Pump Class**
https://www.youtube.com/watch?v=HBsmrLsERIg
This guide will teach you how to make the double pump class in the campaign. You'll need to know the safehouse UI stack in order to do this.

**How to glitch the combat immersion class**
https://www.youtube.com/watch?v=X7SZaPQlOdc
This guide will teach you how you can glitch the combat immersion class. This means you can get the V2 META Class in combat immersion. You'll need to know the safehouse UI stack in order to do this.

**7 Attachments Glitch**
https://www.youtube.com/watch?v=OOet-TL28Eo
This guide will show you how to get more than 6 attachments on your primary weapon. You'll need to know the menu UI stack in order to do this.

#**Extra Stuff // Cosmetic Glitches**
**Free DLC Attachment Skins Glitch**
https://www.youtube.com/watch?v=FLl_cqLBbUs
https://www.youtube.com/watch?v=RknnjKk_1os
These guides will teach you how to get the DLC attachment variants for free. You'll need to know the safehouse UI stack in order to do it.

**Any Camo For Free Glitch**
https://www.youtube.com/watch?v=ecBHyarlxn8
This guide will show you how to get any weapon camo for free except dark matter and the extras camos. You'll need to know either the safehouse UI stack or the variants UI stack (this guide will show you how) in order to do this.

**Paintjob Duplication**
https://www.youtube.com/watch?v=1I1wUzZktJ8

이름	작성자
BO3 Master Guide (Campaign)	Ndt 2 years ago
BO3 Softlock Guide (Campaign & Nightmares)	Ndt 2 years ago
Deleting cutscenes and loading screens (Campaign)	Blur 3 years ago
How to setup V-Meter and TSCID	Ndt 1 year ago
JayZany's Alpha Speedrun Guide.	Arkzyl 4 years ago
Level Up Fast for NG+ (Campaign)	Ndt 2 years ago
Ndt's Exit Warp Strategy (Campaign)	Ndt 2 years ago
UI Stack Strategy (Campaign)	Ndt 2 years ago